Ring-In Power On Use this item to enable or disable Ring-In signals to turn on the system from the power-soft-off mode. Hardware Health Event Monitoring Screen In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. Hold components by the edges and do not touch the ICs. Set to [Disabled] will disable the both. Unplug the power cord from the wall socket before touching any component. Please install the necessary drivers to activate the devices.
||11 February 2008
||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
||Free* [*Free Regsitration Required]
ASRock 939A8X-M AMD Athlon 64 Socket 939 motherboard Review
By continuing to browse this site, you agree to this use. Hold components by the edges and do not touch the ICs.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-bystep guide to the hardware installation. The AGP slot is used to install a graphics card. Share on Google Plus Share. Click the Performance combo list box, to select desired mode.
ASRock A8X-M Lan driver – – Win , Win XP
It may cause permanent damage! This header supports an optional wireless transmitting and receiving infrared module. In the BIOS menu are e.
Do NOT insert any floppy diskette into the floppy drive at this moment! Please refer to the instruction of your IDE device vendor for the details.
Drivers for ASRock 939A8X-M Motherboard
ASRock A8X-M AMD Athlon 64 Socket motherboard Review Result and general impression
While CPU overheat is detected, the system will automatically shutdown.
Then you 9398x-m see these messages, Please insert a diskette into the floppy drive. Ring-In Power On Use this item to enable or disable Ring-In signals to turn on the system from the power-soft-off mode.
Please refer to page 28 for details. You can see device drivers for a ASRock Motherboards below on this page.
Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Select Settings, then Control Panel. Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.
Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. You can set one of the standard values as listed: Unlock a DIMM slot by pressing the retaining clips outward.
Installing an expansion card Step 1. Please connect an ATX power supply to this connector.